How to remove Fiberglass Window Screen

Release time：2025-08-22    Click：75

　　There are many screens and screen doors on the market today, such as Fiberglass Invisible Screen, pull-up rewinding screens, single-door rewinding screen doors, double-door rewinding screen doors, electric rewind screens, sliding door screens, folding screens, magnetic screens, etc. There are also many places to buy, building materials supermarkets, screen window manufacturers, and small stores near the home can be bought.

　　Although the categories sounded a lot, they are mainly divided into three categories: first, single-screen screens, which are traditional, and everyone is familiar; secondly, roller blinds have simple structure, convenient installation and maintenance, and are suitable for maintenance. The principle is similar to that of the rolling door. Inside a frame, there is a window screen that is pulled up and down, pulled up or pulled from the middle, and has a guide rail inside the frame. There is also an invisible screen window. The invisible screen window is not really "invisible". Its design principle is that the wire diameter of the material is extremely fine, the light transmittance is extremely high, and it is not as close as "no screen window".

　　Domestic or imported: choose the yarn to see first and then touch.

　　Imported are mostly made of chemical fiber; domestically produced are glass fiber, and some are made of plastic material. Imported high-quality chemical fiber screens can be tens of thousands of push-pull frictions without deformation; domestic glass fiber can only withstand thousands of times, and plastic window screens are easy to expand and shrink due to material relationship, and the probability of deformation is very large. So you should choose the imported Fiberglass Window Screen.

　　To judge whether the window screen is good or bad, you must first look at it and touch it. First look at whether its eye hole is uniform, such as whether the shape of the eye hole is neat, whether the thickness of the yarn is uniform; the second is to touch the window screen by hand, the hand feels slightly scraped, the quality is better like ironing with iron, and the domestically produced fiberglass window screen It is softer.

　　Next, let's talk about the aluminum alloy screen window. After a period of use, there will be dust on it. If you want to clean it, you must first remove the Aluminium Alloy Window Screening frame. How to remove the screen window can refer to the following experience. .

　　1. A general aluminum alloy screen window, which is fixed on the window rail in two ways, one is like the one in the figure below, and is inside the rail outer frame.

　　2. There is another type, which is the one in the figure below, which falls directly on the outer frame of the track, so when you want to remove the screen, first look at the way the screen frame is placed on the track.

　　3. However, no matter which way the screen window is placed on the window track, if it is to be removed, it is generally raised by raising the screen frame to make enough clearance below.

　　4. If the screen frame is on the outer frame of the track, the screen frame can be removed directly outward; if it is inside the outer frame of the track, the lower frame of the screen is obviously blocked by the outer frame of the window, as shown below.

　　5. At this point, try to move the screen frame into the window track so that it first crosses the first track on the window frame.

　　6. Then lift the other end of the screen frame and let it slowly move out of the window track. When the bottom frame of the screen window is completely removed, the raised screen frame can be lowered, and then the screen window is placed. The top end is slanted and the screen window can be removed.

Previous article：features of Plisse Insect Screen
Next article：Teach you how to choose the knowledge of Fiberglass Insect Mesh