Introduction of construction method of glass fiber mesh

Release time：2025-03-17    Click：23

　　Glass fiber mesh is a kind of material with good corrosion resistance and tenderness based on glass fiber. Used to do building wall insulation, waterproof has two functions.

　　1. If the polymer mortar is separated, it needs to be remixed with agitator to ensure the quality of agitator!

　　2. After weighing the cement and sand in the bucket, pour them into the iron ash tank for mixing. After mixing evenly, add the binder according to the mix proportion for mixing. The mixing must be uniform to avoid segregation and congee like. According to the workability, water can be added appropriately.

　　3. Water is for concrete.

　　4. Polymer mortar should be prepared with use, and the prepared polymer mortar should be used up within 1 hour. Polymer mortar should be placed in the shade to avoid sunlight.

　　5. Cut the mesh from the whole roll of fiberglass mesh according to the required length and width in advance, and reserve the necessary lap length or overlap length.

　　6. Cut in a clean and flat place, the cutting must be accurate, and the cut mesh must be rolled up. Folding and trampling are not allowed.

　　7. The reinforcing layer shall be made at the external corner of the building, and the reinforcing layer shall be pasted on the innermost side, 150 mm on each side.

　　8. When applying the polymer mortar for the first time, the surface of EPS board shall be kept dry and the harmful substances or impurities of board cotton shall be removed.

　　9. When scraping a layer of polymer mortar on the surface of polystyrene board, the scraping area shall be slightly larger than the length or width of the mesh cloth, and the thickness shall be about 2mm. Except for the requirement of edge wrapping, polymer mortar is not allowed to be applied on the side of polystyrene board.

　　10. After scraping the polymer mortar, the grid should be arranged on it, the bending surface of the grid cloth should face the wall, and the grid cloth should be plastered and leveled from the center to the surrounding, so that the grid cloth can be embedded in the polymer mortar, and the grid cloth should not be folded. After the surface is dry, a layer of polymer mortar should be plastered on it, with a thickness of 1.0 mm, and the grid cloth should not be exposed.

Previous article：The biggest features of the fiberglass insect screens is fire-proof and invisible
Next article：Factors to Consider When Choosing The Right Mesh for Your Windows