Measure the Width of the Window Screen

Release time：2025-05-09    Click：72

　　Place the Tape Measure: Start at the left side of the window where the screen will go. Hold the tape measure level.

　　Measure Across: Stretch the tape measure to the right side of the window. Subtract 1/16" from this measurement to ensure the screen will fit comfortably.

　　Record the Width: Write down the width to the nearest 1/16". This adjustment helps the screen fit better and makes it easier to install and remove.

　　Double-Hung Windows

　　Locate the Top Track

　　Look for a U-shaped channel at the top of the window where the screen will slide in.

　　Find the Side Tracks

　　Check the sides of the window for flat areas that create a continuous track running from the top down to the bottom. These tracks should align with the top track and extend along the sides of the window.

　　Identify the Bottom Lip

　　Locate the lip at the bottom of the window, directly below the top track. This lip helps hold the bottom of the screen in place.

　　Determine the Lip Type

　　If your window has both an inside and outside lip, use the outside lip for measuring solar screens or the inside lip for insect screens.

　　Measure the Height

　　Insert the tape measure into the top track. Extend it downward until it's about 1/16" to 1/8" above the bottom lip. This gives you the height measurement of the screen.

　　Measure the Width

　　Place the tape measure on one side of the window and extend it to the other side. Subtract 1/16" from this measurement to ensure the screen fits properly. This gives you the width measurement of the screen.

Previous article：How To Choose Sliding Screen Door for Your Home
Next article：Cleaning Window Screens in Place