How to Measure for Replacement Window Screen? Step-by-Step Guide

Release time：2025-11-22    Click：47

　　Replacing a window screen is simple if you get the measurements right. Always measure the existing screen's frame, not the window opening.

　　Step-by-Step Guide:

　　1. Remove the Screen: Carefully take the old screen out of the window channel.

　　2. Lay it on a Flat Surface: Place it on a table or floor to ensure it's not bent or bowed.

　　3. Measure the Width:

　　* Use a tape measure.

　　* Measure the outside edge of the screen frame from left to right.

　　* Take measurements at the top, middle, and bottom.

　　* Record the smallest of these three measurements.

　　4. Measure the Height:

　　* Measure the outside edge of the screen frame from top to bottom.

　　* Take measurements on the left, center, and right sides.

　　* Record the smallest of these three measurements.

　　5. Note the Frame Type: Check if the frame is a standard "flush" type or has a special lip or groove.

　　6. Order Your Screen: Provide the width and height measurements (always width first) to purchase a replacement screen or screen kit.

　　Pro Tip: Measure in millimeters or 1/16th of an inch for the highest accuracy.

Previous article：Solar Control Window Screen 80% UV Block Heat Reduction
Next article：Advantages of Fiberglass Window Screening in the Building and Decorative Materials Industry